Program rca remote control

If the device you are trying to control is not labeled on the remote, press the "Aux" Auxiliary button. After a few moments, the Power button will light up and stay lit. Continue holding the device button. Make sure to keep the remote pointed at the device. Press and hold the Power button while continuing to hold the device button. The Power button light will turn off. Continue to hold both keys for about three more seconds. The Power button light will turn back on.

The Power button light should stay lit after releasing both buttons. If the Power button light does not stay on, start these steps over again and ensure that you are holding the buttons at the right times.

Enter the Brand Code. After releasing both buttons and checking the the Power button light is still on, enter the Brand Code using the number pad on the remote. Make sure that you are pointing the remote at the device the entire time. If you enter the code correctly, the Power button light will blink once and then stay lit. If you enter the code incorrectly, the Power button light will blink four times and then turn off.

If this happens, you will need to start the process over. Ensure that you are entering the correct code for your device's brand, and that the device supports Brand Code Search. Every time the Power button is pressed, the next code in the brand's sequence is sent to the device. The Power button will blink each time a code is sent. Continue pressing the button until the device turns off. This means that you have found the correct code.

If you cycle through the entire list, the Power button will blink four times and then turn off. You will need to try another method in this article to program the remote. This will save the code in the remote and assign it to the Device button you pressed earlier.

Test out the remote. After saving the code, use the remote to try out various functions on the device. If you aren't able to control most of the functionality, try programming the remote using one of the other methods in this article.

Sometimes different codes will give differing amounts of functionality. Turn on the device that you want to control. The device must support the use of remotes in the first place for example, many stereos don't support remotes. The amount of functionality you get out of the universal remote will vary from device to device.

Every time the Power button is pressed, the next code in the entire code list is sent to the device. Cycling through the full code list can take a significant amount of time. Depending on the remote, you may have to go through several hundred codes. You can try another method in this article to program the remote, but chances are the remote will not work with your device, as every possible code has been tried.

Method 2. Using Direct Code Entry. If you know the exact code that you need to enter to control your device, this method will let you quickly enter it. You can find the exact codes by looking in the remote's documentation, or by using the database on the RCA support website.

Some devices have multiple possible codes, so you may need to try this a few different times with each code until you find the one that works. Press and hold the Code Search button. After a few moments, the light on the remote will turn on. Release the Code Search button. But first, you need to program it. All you need is patience … and to check out these simple steps. But patience is key because sometimes the first try can fail.

RCA universal remote control 2. Brand new batteries check packaging for specific type 3. This handy guide and instructions 4. Patience See above! Throughout this article, we will guide you on how to program your remote control without a code. But in case you simply need the codes, you can go here. To continue without a code, keep reading.

Manually turn on your TV. Aim your remote at the TV panel and press and hold the TV button. Press the Play or the Slow button on your remote for five seconds. After this, your TV should turn off.

If it does not turn the TV off, press the Play or Slow button again. Repeat this process every five seconds until the device turns off. Once the device turns off that means the remote control should be in sync with your TV. If this process does not work, try to be patient. Just repeat these steps, making sure you are pressing the buttons the full time that is needed. The first thing you need to make sure is that your universal remote has an option for it. Say, for example, DVD, streaming device, Blu-ray, etc.

Here are the instructions you need to follow. Manually turn on the device you want to set up, making sure that your RCA universal remote is aiming towards it. Press and hold the button that matches the device you are pairing. Wait for the light on the remote to blink and then stay steady for you to follow the next step. Press and hold the device button at the same time as the Power button, until the light turns off and on.

Most of the time this takes up to five seconds. Release both the Power and the device button. You can get one pretty much anywhere that sells basic electronics: drugstores, Walmart, Family Dollar, Amazon, etc. Oh, and we almost forgot—one of the best parts about these remotes is the price. Follow these steps to get up and running with yours today.

You can find RCA universal remote codes here. About the Author Randy Harward. His TV writing also pops up on SatelliteInternet. Randy digs books, movies, burritos, disc golf, tarantulas, and cats. Find the device code for the equipment you want to control. Power on the equipment you want to pair. Press and hold the Code Search button on the remote. The light on the remote will blink once and then stay steady. Enter the device remote code from Step 1.

The light on the remote should turn off. Test the remote. Try several different functions to make sure everything is working.